MSME-TOOL ROOM, HYDERABAD - UNIVERSITY COLLEGE OF ENGINEERING, OSMANIA UNIVERSITY

M.E.(Mech.-CAD/CAM) and M.E.(Tool Design) - Admission 2008

A GOVT. OF INDIA SOCIETY, MINISTRY OF MSME)BALANAGAR, HYDERABAD – 500 037 (A.P.) INDIA(An ISO 9001 : 2000 Institution)In Collaboration withUNIVERSITY COLLEGE OF ENGINEERING (AUTONOMOUS)OSMANIA UNIVERSITY, HYDERABAD-500 007Admission into M.E.(Mech.-CAD/CAM) & M.E.(Tool Design)-2008ApplicationProspectus
Applications are invited in the prescribed form for full-time Post Graduate courses in Mechanical Engineering, conducted under Industry-Institution joint programme leading to M.E. Degree for the academic year 2008-09.1) Master of Engineering (M.E.) - Mech. - CAD/CAMQualification : B.E./B.Tech in Mechanical Engineering / Production Engineering/ Mechanical Engineering with specialization in Mechatronics/equivalent with minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE. The GATE rank holders also need to qualify themselves in the Entrance Test.Course Fee : Rs.31,500/- per semester admitted under self-sponsored category and Rs.39,000/- per semester for Industry sponsored category. In addition, the candidates have to pay one time Autonomous fee of Rs.6000/- to University College of Engineering (Autonomous) at the time of admission.No. of Seats - For full-time(a) Self sponsored - 20 Seats(b) Industrial sponsored - 05 Seats2) Master of Engineering (M.E.) - Tool DesignQualification : B.E./B.Tech in Mechanical Engineering / Production Engineering of its equivalent with minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE. The GATE rank holders also need to qualify themselves in the Entrance Test.Course Fee : Rs.20,000/- per semester admitted under self-sponsored category and Rs.27,000/- per semester for Industry sponsored category. In addition, the candidates have to pay one time Autonomous fee of Rs.6000/- to University College of Engineering (Autonomous) at the time of admission.No. of Seats - For full-time(a) Self sponsored - 20 Seats(b) Industry sponsored - 05 SeatsDuration : 24 months (4 semesters) for both the courses.AGE : No age limit. However, candidates below 45 years of age are preferred.EXPERIENCE : (For Sponsored candidates only)Minimum 2 years of professional experience after passing qualifying examination as on 30.06.2008.ADMISSION :Admission is purely based on rank obtained in the Entrance Test to be conducted by University College of Engineering, Osmania University. Entrance Test is compulsory and common for all categories of candidates including sponsored, non-sponsored.DATE OF ENTRANCE TEST AND CENTRE : 05.07.08 (Saturday) at 10.00 a.m. at Main Building, University College of Engineering, Osmania University, Hyderabad-500 037.HOW TO APPLY :Prescribed application forms with full details can be obtained from Central Institute of Tool Design, Balanagar, Hyderabad-37, by sending a crossed Demand Draft for Rs.300/-(Rs.100/- for SC/ST candidates and fully exempted for PWD category candidates) drawn in favor of Principal Director, Central Institute of Tool Design, Balanagar, Hyderabad- 500 037 on any Nationalised Bank payable at Hyderabad. The SC/ST candidates need to enclose a copy of the Caste certificate attested by a Gazetted Officer. Envelope containing the request for application form and other details should be superscribed with “request for application for M.E.(Mechanical- CAD/CAM) / M.E. (Tool Design) course. A self addressed envelope (size 26 cm x 13 cm) duly fixed with Rs.15/- stamp also should be sent. Application forms can also be downloaded from our website www.citdindia.org. A crossed Demand Draft for Rs.300/-(Rs.100/- for SC/ST candidates and fully exempted for PWD category candidates) drawn in favor of Principal Director, Central Institute of Tool Design, Balanagar, Hyderabad-500037 on any Nationalised Bank payable at Hyderabad should be enclosed along with the downloaded application form.Candidates seeking admission under non-sponsored, sponsored category have to indicate order of preference in the application form. However the Entrance Test for all the categories will be common.IMPORTANT DATESCommencement of Issue of Application Forms : 07.5.08a) Last Date for submission of duly filled in Application Forms at CITD upto 5.00 P.M. : 23.6.08b) Last date for receipt of filled in applications with late fee of Rs.100/- at CITD upto 5.00 p.m. : 25.6.08NOTE:a) In respect of candidates sponsored by the Industries, the sponsoring authorities have to forward the application with sponsoring letter, clearly indicating that they shall not withdraw the candidate from the course till its completion.b) Candidates appearing for final year degree can also apply for the course provided they secure a final pass in the qualifying exam at the time of the admission and they should produce the provisional degree certificate. If the candidate fails to produce the provisional degree certificate on the day of counseling, the admission will be summarily rejectedc) Reservations exist as per Govt. of India rules.d) The Institute is not responsible for any postal delay.e) The rules made by the advisory committee regarding selection and closure of the admissions shall be final and the committee reserves the right to alter, vary, change and ,/or modify the rules governing the admissions. The candidates are advised to refer the instructions provided with the application form and prospectusPRINCIPAL DIRECTOR

MSME-TOOL ROOM, HYDERABAD

ADMISSION INTO LONG TERM COURSES - 2008 (PGTD, PDTD, DTDM, ATM, AMC)

CENTRAL INSTITUTE OF TOOL DESIGN(A GOVT. OF INDIA SOCIETY, MINISTRY OF MSME)BALANAGAR, HYDERABAD – 500 037 (A.P.) INDIA(An ISO 9001 : 2000 Institution)ADMISSION INTO LONG TERM COURSES - 2008Admission Advertisement 2008
Prospectus
Central Institute of Tool Design is an ISO 9001:2000 certified premier Institute in Asia to provide specialized training in Tool Engineering, CAD/CAM & Mechatronics. The objective of the Institute is to meet the requirements of the Industries in the field of Tool Design & Manufacture and to train the technical personnel in these fields. The Institute was originally established in the year 1968 by the Govt. of India with the assistance of UNDP and ILO.Applications are invited in the prescribed form for admission into the following Long Term courses commencing from August 2008.COURSE-1POST GRADUATE COURSE IN TOOL, DIE & MOULD DESIGN (PGTD)(Recognized by the Govt. of India, Ministry of Education, as an advanced Post Graduate qualification.)Duration: One and a half years. (3 semesters)Qualification: B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.Age: 30 years (not born before 31.08.1978), for self sponsored.No of seats:a) 32 seats Self sponsored.b) 28 seats Industry sponsored.Course Fee:a) Rs. 35,000/- for Self Sponsoredb) Rs. 46,000/- for Industry sponsored.COURSE-2POST DIPLOMA COURSE IN TOOL DESIGN (PDTD)Duration: One year. (2 semesters)Qualification: LME/DME with an aggregate of minimum 60% marks for general category candidates and an aggregate of minimum 50% marks for SC/ST category candidates.Age: 27 years (not born before 31.08.1981), for self sponsored.No of seatsa) 36 seats Self sponsored.b) 24 seats Industry sponsored.Course Feea) Rs. 20,000/- per semester for Self Sponsoredb) Rs. 25,000/- per semester for Industry sponsored.COURSE-3DIPLOMA COURSE IN TOOL, DIE & MOULD MAKING (DTDM)Duration: Four years (8 semesters)Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 40% marks for SC/ST category candidates.Age: 15 to 19 years (not born before 31.08.1989)No of seats: 60 seatsCourse Fee: Rs.10,000/- per semester.COURSE-4ADVANCED TOOL MAKER’S COURSE (ATM)Duration: Two years (4 semesters)Qualification: SSC/Matric with ITI in any one of the trades-Tool & Die Maker/ Fitter/ Machinist/ TurnerAge: 25 years (not born before 31.08.1983)No of seats: 30Course Fee: Rs.12,000/- per yearCOURSE-5ADVANCED MACHINIST COURSE (AMC)Duration: Three years (6 semesters)Qualification: SSC (10th Class) or equivalent examination appeared but failed with Maths & Science as subjects.Age: 15 – 24 years (not born before 31.8.1984).No of seats: 15 minimum and 30 maximumMode of selection: Selection on the basis of marks obtained in Maths & Science subjects in the qualifying examination i.e. 10th class failed.Course Fee: Rs.6,000/- per semesterMODE OF SELECTION:A) Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.B) Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.C) For ATM course, the candidates will be selected based on merit in the qualifying examinatios i.e. X class & ITI with weightage in the ratio of 50:50 respectivelyD) For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed)TENTATIVE DATE OF EXAMINATION : 06.07.08 (Sunday) at Hyderabad.HOW TO APPLY:A) Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.B) Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.C) Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.Cost of Application form:1 PGTD - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-2 PDTD - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-3 DTDM - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-4 ATM - General category candidates (Self & Industry sponsored): Rs.100/-; SC/ST category candidates: Fully exempted5 AMC - General category candidates (Self & Industry sponsored): Rs. 100/-; SC/ST category candidates: Fully exemptedPWD category candidates: Fully exemptedThe SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.Commencement of issue of application forms : 23.04.08Last date for submission of filled–in applications (upto 5.00 pm at CITD) : 23.06.08Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08NOTE:1. Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.2. Reservation for SC/ST/PWD category exists in self sponsored category.3. Age relaxation upto 5 years for SC/ST candidates.4. The Institute is not responsible for any postal delay.5. The seats advertised are provisional and the Institute reserves the right to increase or decrease the number of seats.6. The rules made by the Institute regarding selection and closure of the admissions shall be final and the Institute reserves the right to alter, vary, change and / or modify the rules governing the admissions.7. Candidates are advised to refer the prospectus for further details.For further details, please contact Training DepartmentTel Phone No.23771959, 23776156, 23772747,23772748, Fax No. 040-23772658Visit them at: www.citdindia.org E- mail: citdplacements@citdindia.org