Advanced Training Institute, Kolkata Admission 2008

ADMISSION NOTICE FOR CRAFTSMEN TRAINING SCHEME IN MODEL TRAINING INSTITUTE

Government of India
Ministry of Labour & Employment (DGE&T)
Advanced Training Institute, Kolkata
Dasnagar, Howrah-711105
Website: www.dget.nic.in
E-mail: atihowrah@nic.in

Advanced Training Institute, Kolkata Admission 2008

ADMISSION NOTICE FOR CRAFTSMEN TRAINING SCHEME IN MODEL TRAINING INSTITUTE

Session Starting from August-2008


Model Training Institute (MTI) attached to the Advanced Training Institute, Kolkata established by the 'Government of India, Ministry of Labour, Directorate General of Employment & Training offers training under Craftsmen Training Scheme (CTS) for the session starting from August 2008 National Trade Certificate issued by NCVT will be awarded to the trainees on successful completion of the course.

Reservation of Seats : Seats are reserved for SC,ST, PH etc. as per Govt Rules.

Age: Between 14-40 years on 01.08.2008 & 45 years for Ex-Servicemen and War Widows.

Selection: Selection shall be made on Merit basis and Eligibility Tests for Trades mentioned at Sl.No.1 to 3.

Training cost: Tuition fee of Rs. 100/- per month for all trades except COPA& IT & ESM. Tuition fee of COPA & Hi ESM trade will be charged @ Rs. 200/- per month, Caution money deposit Rs. 250/- (refundable) for trainees of all trades.

Hostel Facility: Limited nos. of accommodation as available will be provided to deserving trainees against payment of hostel rent, hostel service charge and hostel caution money as applicable.

Medical Facility : Medical Examination Fee of Rs. 25 /- per trainee

Stipend/Scholarship: Trainees will be awarded poverty-cum-merit stipend & Merit Scholarship at the prescribed rate as applicable on the basis of internal examination after six months.


TRADE:
01 Sheet Metal Worker (1 yr)
Minimum Educational Qualification: 8th pass (class 7th pass where terminal examination is in class 7th). Eligibility Test will be conducted for trades (s.no 1 to 3) Date of test will be mentioned in application forms.

02 Carpenter (1yr)
Minimum Educational Qualification: -do-

03 Welder (1 yr)
Minimum Educational Qualification: -do-

04 Fitter (2 yrs)
Minimum Educational Qualification: Passed 10th class examination under 10+2 system of education or its equivalent.

05 Machinist (2 yrs)
Minimum Educational Qualification: Passed 10th class examination under 10+2 system of education or its equivalent.

06 Electronics Mech (2 Yrs)
Minimum Educational Qualification: Passed 10th class examination under 10+2 system of education with science and Mathematics or its equivalent.

07 Draughtsman (Mechanical) (2 yrs)
Minimum Educational Qualification: -do-

08 MMTM (Mech. Machine Tool Maint.) (3 yrs)
Minimum Educational Qualification: -do-

09 Electrician (2 yrs)
Minimum Educational Qualification: Passed 10th class exam, under 10+2 system of education with science as one of the subjects or its equivalent.

10 Turner (2 yrs)
Minimum Educational Qualification: Passed 10th class examination under 10+2 system of education or its equivalent.

11. Ref. & Air Conditioning Mechanic (2 yrs)
Minimum Educational Qualification: Passed 10th class with Science & Mathematics under 10+2 system or its equivalent.

12. Mechanic (Motor Vehicle) (2 yrs)
Minimum Educational Qualification: Passed 10th class exam, under 10+2 system of education with science as one of the subjects.

13. COPA (1 yr)
Minimum Educational Qualification: 12th class passed under 10+2 system or duly recognised diploma in engineering from any polytechnic of three years duration after class 10th candidates with higher qualification will be given preference provided other things being equal.


How to Apply:
Candidates desiring admission may apply in the prescribed application form obtainable by tendering Rs. 25/- (for cost of form) along with registration fees of Rs. 50/- to be paid at the time of submission of application form by cash if submitted in person or through Postal Order/Demand Draft in favour of DDO ATI Kolkata, Dasnagar, Howrah-5 For obtaining application form outstation candidates may send Postal Order or Demand Draft of Rs. 25/- in favour of DDO, ATI Kolkata, Dasnagar, Howrah-5, enclosing there with a stamped envelop (Rs.5/-) of size 12 cms x 25 cms. A recent passport size photograph of the candidate must be pasted on application form. Please write on the top of the envelope "Application Form for MTL".

Sale & Receipt of Application Forms - 26-05-2008 to 20-06-2008, 10.00 am to 12.00 Noon & 2 pm to 4 pm (Except on Sturday & Sunday)

The Merit LIst will be Displayed in Institute Notice Board on 28/7/2008

Note: Director of Institute reserves the right to discontinue or after any trade, at his discretion without assigning any reason or notice.

The Institute is not responsible for any delay caused due to postal Correspondence.

CLOSING DAE FOR THE RECEIPT OF APPLICATION FOR ADMISSION IS 20TH JUNE, 2008

SOCIETY FOR SELF EMPLOYMENT, DELHI.

Fashion Designing, Refrigeration and Air-conditioning, Plumbing admission to short-term courses

(Govt. of NCT of Delhi)B 26-29, Flatted Factories Complex, Jhandewalan, New Delhi-110055H.O.: Udyog Sadan, Patpar Ganj Industrial Area, Delhi-92Phone: 23673098Society for Self Employment has been established in 1987 by the Govt. of Delhi for providing training to young dedicated unemployed person in various technical trades to secure gainful employment in private sector.Applications are invited form candidates for admission to the under mentioned short-term courses of the society form 1st July 2008.Name of Course1. Fashion Designing Programme (12 months)Educational Qualification: 12th PassCourse Fee: Rs.1200/-2. Refrigeration and Air-conditioning (4 months)Educational Qualification: 10th PassCourse Fee: Rs.400/-3. Plumbing (4 months)Educational Qualification: 10th PassCourse Fee: Rs.400/-Details of availability of seats and percentage of reservation of seats for different categories are given as under:-1. FDP ( 75 seats) GEN%: 62, SC%: 15, OBC%: 15, Disabled%: 03, Dependent of Ex-serviceman/ War widows/ personnel died on anti terrorist operations%: 032. RAC (50 seats) GEN%: 62, SC%: 15, OBC%: 15, Disabled%: 03, Dependent of Ex-serviceman/ War widows/ personnel died on anti terrorist operations%: 033. Plumbing (25 seats) GEN%: 62, SC%: 15, OBC%: 15, Disabled%: 03, Dependent of Ex-serviceman/ War widows/ personnel died on anti terrorist operations%: 03Prospectus-cum-application form will be available w.e.f.12th May, 2008 2008 to 6th June, 2008 between 10.00 AM to 4.00 PM on all working days form their training centre located at E-26-29, Flatted Factories Complex, Jhandewalan, New Delhi-110005 on payment of Rs.25/-. The female candidates desirous of admission in Fashion Designing Course and residing in Trans-Yamuna Area should collect forms and apply at their training centre located at Shed No.7, Wavers Colony, Sunder Nagri, Nand Nagri, Delhi-110093 (Near SDM Court)The application will be received at he above mentioned training centre up to 07-06-2008 between 10.00AM to 4.00PM on all working days. The date & time of interview will be indicated on the acknowledgement slip at the time of submission of application form which should be submitted in person by the candidates. The candidates should be residents of Delhi in the age group of 18-25 years.(M.K. SHARMA)F& AO (SSE)

MANIPAL COLLEGE OF NURSING

BSc NURSING/ BSc Allied Health Sciences ADMISSIONS 2008

SPOT ADMISSIONS 2008BSc NURSING/BSc Allied Health SciencesEligible candidates (10+2 with PCB and English with 50% marks) can approach with all original documents (10th, 10+2, TC and conduct certificates) and 1st year fees (Rs.1,17,500/- DD in favour of Manipal University payable at Manipal/Udupi/Bangalore).ERNAKULAM:Hotel Cochin TowersLisie Junction, KochiDate: 04-06-2008Time: 9 AM to 5 PMCANNAORE:Hotel Palmgrove, Opp. Thiruvepadi MillRoad, On the way to Govt. Guest HouseDate: 05-06-2008Time: 9 AM to 5 PMDIRECTOR ADMISSIONSMANIPAL UNIVERSITYManipal 576104, KarnatakaFor admission details visit: www.admissions.manipal.edu. Phone: 0820-2571978/ 2922574, Fax: 2574318Email: dradm@manipal.edu

UNIVERSITY OF MYSORE, YUVARAJA'S COLLEGE

Five year Integrated M.Sc course in Molecular Biology and M.Phil in Botany year 2008-09 Admission

(AUTONOMOUS COLLEGE)MYSORE-570005Dated: 18-05-2008Telephone No.: 2419292Email: ycmcs@sancharnet.inApplication form for M.Phil in Botany and Msc Molecular Biology year 2008-09M.Phil Botony5 year integrated Msc Molecular biologyAdvertisements for M.Phil & Molecular biology 2008-09M.Phil & 5 year integrated Msc Molecular biologyADMISSION NOTIFICATION
Applications are invited from eligible candidates to the (5- year) Integrated M.Sc course in Molecular Biology under fully self-finance scheme at Yuvaraja’s College, Mysore-570005, Karanataka, India.Eligibility:
Students from all over India, who have completed the Pre-University course equivalent course in the Science stream with at least 50% marks in aggregate (excluding languages) and at least 50% marks in Biology (relaxable by 5% for SC/ST candidates) are eligible to apply.The compulsory entrance test of All India level will be held at Yuvaraja’s College on 07-07-2008 between 11-30 AM and 1-30 PM. The selection is purely on the basis of performance in the entrance test.Admission procedure:The application form may be obtained from 02-06-2008 in person from the Principal on payment of Rs.120/-. They can also be obtained through post by sending a Demand Draft for Rs 120/- plus Rs.80/- towards postal charges. They can also download the application forms from the web www.yuvarajacollege.org and www.ycm.uni-mysore.ac.in and submit the same along with a Demand Draft for Rs.120/- Another demand Draft for Rs 300/- for the entrance examination favouring the Principal, Yuvaraja’s College, payable at SBM, Mysore will have to be enclosed with the application form.1. The filled-in application together with the Demand Draft along with necessary certificates and copies of marks cards should be submitted to the Principal, Yuvaraja’s College, Mysore-57005 on or before 05-07-2008(latest by 5 pm)
2. Fee structure: Rs 40,000/- per year (or Rs.20,000/- per semester).No postal intimation will be sent. The list of the selected candidates in the waiting list will be displayed on the notice board.PrincipalProf. N. Aswathamma , M.A
For further information please contact:The Principal, Yuvaraja’s College, MysoreTelephone : (0)821-2419292 , 2419239, 2419236.Email: principal_ycm@rediffmail.com Mobile: +91 94489 33006
-----------------------------------------------------------------
University of MysoreYuvaraja’s College (Autonomous)(Estd. 1928)Mysore - 570 005Admission –Notification
Dated: 28.05.2008
Applications are invited from the eligible candidates for admission to M.Phil Degree course in Botany during the academic year (2008-2009) at Yuvaraja’s College, Mysore-570 005, Karnataka, India.Yuvaraja’s college is the only Constituent Science College of the prestigious university of Mysore, which is said to be the academic capital of Karnataka and is the first among the constituent colleges to attain autonomous status.
The college has an excellent infrastructure and well qualified teachers to offer higher education. The faculty has undertaken 15 research projects in various branches. Prof. J. Shashidhara Prasad, the then Vice-Chancellor, university of Mysore, Mysore, has taken keen interest in the progress of this institution and is responsible for introducing the PG Courses in Chemistry, 5 year Integrated M.Sc. in Molecular Biology and M.Phil in Botany.
M.Phil course in Botany is being started for the first time in the whole of Mysore University is a post M.Sc. Programme, having lot of scope. Students with this degree are eligible for lecturership. They also get an exposure to the advanced techniques of biological science in general and Botany in particular.Eligibility:
Candidates who have obtained at least 55% of marks at the Masters Degree examination in Botany/Applied Botany from the University of Mysore or any other recognized University/ Institution shall be eligible for admission to the M.Phil Degree Course. However, there shall be a relaxation of 5% of marks in the case of candidates belonging to scheduled caste and scheduled tribe.Admission Procedure:
Application form may be obtained in person from the Principal on payment of Rs. 120/- or through post by sending a demand draft for Rs. 200/-. Date for the issue of application and other details will be notified in the college website www.yuvarajacollege.org. Interested candidates can contact over the telephone (Tel No.: 0821-2419231 , 9845618769 ) for further details.

INSTITUTE OF HUMAN BEHAVIOUR AND ALLIED SCIENCES (IHBAS), Faculty of Medical Sciences, Uni. of Delhi

MPhil (Clinical Psychology) Admission 2008

An Autonomous Body under the Government of National Capital Territory of Delhi)G.T. Road, Dilshad Garden, Delhi-110095Phone-No: 22597750, 22114021, 22583056, Fax: 22114066, 2599227Email: directorihbas@vsnl.net Website: www.ihbas.delhigovt.nic.in Applications are invited by the Institute in the prescribed format (For Application format please refer the New Indian Express (CBE) May 31, 2008. p.7) for admission to the following Course:MPhil (Clinical Psychology)Academic session 2008-2010 (Under Faculty of Medical Sciences, University of Delhi)Number of Seats-12 (SC-1, ST-1, GEN-10)Selected candidates will be considered for stipend payment @Rs.5000/- per month. Another 4 seats in addition to the aforesaid 12 seats are available for foreign nationals (2 seats) and in-service candidates (2 seats) without any payment of stipend. Fee from foreign nationals will be charged as per University of Delhi rules. Hostel facilities are available.Eligibility: MA/ MSc in Psychology/Applied Psychology/Cognitive Science/ Clinical Psychology from recognized University with minimum 55% marks.How To Apply:Application complete in all respects should be sent to The Director, IHBAS, Post Box No.9520, Post Office Jhilmif, Dilshad Garden, Delhi-110 095.Last date of submission of submission of application form is 15 July 2008.The fee of Rs.500/- non refundable in the form of Demand Draft drawn in favour of Registrar, University of Delhi should be enclosed with the application. Attested copies of mark sheets/degree certificates of the claimed qualifications and work experience in the application, should also be enclosed. Selection will be based on entrance test on 31st Aug. 2008 followed by interview to be held on 1st and 2nd September 2008.Application form can also be downloaded form the website www.ihbas.delhigovt.nic.in

MSME-TOOL ROOM, HYDERABAD - UNIVERSITY COLLEGE OF ENGINEERING, OSMANIA UNIVERSITY

M.E.(Mech.-CAD/CAM) and M.E.(Tool Design) - Admission 2008

A GOVT. OF INDIA SOCIETY, MINISTRY OF MSME)BALANAGAR, HYDERABAD – 500 037 (A.P.) INDIA(An ISO 9001 : 2000 Institution)In Collaboration withUNIVERSITY COLLEGE OF ENGINEERING (AUTONOMOUS)OSMANIA UNIVERSITY, HYDERABAD-500 007Admission into M.E.(Mech.-CAD/CAM) & M.E.(Tool Design)-2008ApplicationProspectus
Applications are invited in the prescribed form for full-time Post Graduate courses in Mechanical Engineering, conducted under Industry-Institution joint programme leading to M.E. Degree for the academic year 2008-09.1) Master of Engineering (M.E.) - Mech. - CAD/CAMQualification : B.E./B.Tech in Mechanical Engineering / Production Engineering/ Mechanical Engineering with specialization in Mechatronics/equivalent with minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE. The GATE rank holders also need to qualify themselves in the Entrance Test.Course Fee : Rs.31,500/- per semester admitted under self-sponsored category and Rs.39,000/- per semester for Industry sponsored category. In addition, the candidates have to pay one time Autonomous fee of Rs.6000/- to University College of Engineering (Autonomous) at the time of admission.No. of Seats - For full-time(a) Self sponsored - 20 Seats(b) Industrial sponsored - 05 Seats2) Master of Engineering (M.E.) - Tool DesignQualification : B.E./B.Tech in Mechanical Engineering / Production Engineering of its equivalent with minimum of 55% marks in the qualifying examination from the Institutions approved by AICTE. The GATE rank holders also need to qualify themselves in the Entrance Test.Course Fee : Rs.20,000/- per semester admitted under self-sponsored category and Rs.27,000/- per semester for Industry sponsored category. In addition, the candidates have to pay one time Autonomous fee of Rs.6000/- to University College of Engineering (Autonomous) at the time of admission.No. of Seats - For full-time(a) Self sponsored - 20 Seats(b) Industry sponsored - 05 SeatsDuration : 24 months (4 semesters) for both the courses.AGE : No age limit. However, candidates below 45 years of age are preferred.EXPERIENCE : (For Sponsored candidates only)Minimum 2 years of professional experience after passing qualifying examination as on 30.06.2008.ADMISSION :Admission is purely based on rank obtained in the Entrance Test to be conducted by University College of Engineering, Osmania University. Entrance Test is compulsory and common for all categories of candidates including sponsored, non-sponsored.DATE OF ENTRANCE TEST AND CENTRE : 05.07.08 (Saturday) at 10.00 a.m. at Main Building, University College of Engineering, Osmania University, Hyderabad-500 037.HOW TO APPLY :Prescribed application forms with full details can be obtained from Central Institute of Tool Design, Balanagar, Hyderabad-37, by sending a crossed Demand Draft for Rs.300/-(Rs.100/- for SC/ST candidates and fully exempted for PWD category candidates) drawn in favor of Principal Director, Central Institute of Tool Design, Balanagar, Hyderabad- 500 037 on any Nationalised Bank payable at Hyderabad. The SC/ST candidates need to enclose a copy of the Caste certificate attested by a Gazetted Officer. Envelope containing the request for application form and other details should be superscribed with “request for application for M.E.(Mechanical- CAD/CAM) / M.E. (Tool Design) course. A self addressed envelope (size 26 cm x 13 cm) duly fixed with Rs.15/- stamp also should be sent. Application forms can also be downloaded from our website www.citdindia.org. A crossed Demand Draft for Rs.300/-(Rs.100/- for SC/ST candidates and fully exempted for PWD category candidates) drawn in favor of Principal Director, Central Institute of Tool Design, Balanagar, Hyderabad-500037 on any Nationalised Bank payable at Hyderabad should be enclosed along with the downloaded application form.Candidates seeking admission under non-sponsored, sponsored category have to indicate order of preference in the application form. However the Entrance Test for all the categories will be common.IMPORTANT DATESCommencement of Issue of Application Forms : 07.5.08a) Last Date for submission of duly filled in Application Forms at CITD upto 5.00 P.M. : 23.6.08b) Last date for receipt of filled in applications with late fee of Rs.100/- at CITD upto 5.00 p.m. : 25.6.08NOTE:a) In respect of candidates sponsored by the Industries, the sponsoring authorities have to forward the application with sponsoring letter, clearly indicating that they shall not withdraw the candidate from the course till its completion.b) Candidates appearing for final year degree can also apply for the course provided they secure a final pass in the qualifying exam at the time of the admission and they should produce the provisional degree certificate. If the candidate fails to produce the provisional degree certificate on the day of counseling, the admission will be summarily rejectedc) Reservations exist as per Govt. of India rules.d) The Institute is not responsible for any postal delay.e) The rules made by the advisory committee regarding selection and closure of the admissions shall be final and the committee reserves the right to alter, vary, change and ,/or modify the rules governing the admissions. The candidates are advised to refer the instructions provided with the application form and prospectusPRINCIPAL DIRECTOR

MSME-TOOL ROOM, HYDERABAD

ADMISSION INTO LONG TERM COURSES - 2008 (PGTD, PDTD, DTDM, ATM, AMC)

CENTRAL INSTITUTE OF TOOL DESIGN(A GOVT. OF INDIA SOCIETY, MINISTRY OF MSME)BALANAGAR, HYDERABAD – 500 037 (A.P.) INDIA(An ISO 9001 : 2000 Institution)ADMISSION INTO LONG TERM COURSES - 2008Admission Advertisement 2008
Prospectus
Central Institute of Tool Design is an ISO 9001:2000 certified premier Institute in Asia to provide specialized training in Tool Engineering, CAD/CAM & Mechatronics. The objective of the Institute is to meet the requirements of the Industries in the field of Tool Design & Manufacture and to train the technical personnel in these fields. The Institute was originally established in the year 1968 by the Govt. of India with the assistance of UNDP and ILO.Applications are invited in the prescribed form for admission into the following Long Term courses commencing from August 2008.COURSE-1POST GRADUATE COURSE IN TOOL, DIE & MOULD DESIGN (PGTD)(Recognized by the Govt. of India, Ministry of Education, as an advanced Post Graduate qualification.)Duration: One and a half years. (3 semesters)Qualification: B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.Age: 30 years (not born before 31.08.1978), for self sponsored.No of seats:a) 32 seats Self sponsored.b) 28 seats Industry sponsored.Course Fee:a) Rs. 35,000/- for Self Sponsoredb) Rs. 46,000/- for Industry sponsored.COURSE-2POST DIPLOMA COURSE IN TOOL DESIGN (PDTD)Duration: One year. (2 semesters)Qualification: LME/DME with an aggregate of minimum 60% marks for general category candidates and an aggregate of minimum 50% marks for SC/ST category candidates.Age: 27 years (not born before 31.08.1981), for self sponsored.No of seatsa) 36 seats Self sponsored.b) 24 seats Industry sponsored.Course Feea) Rs. 20,000/- per semester for Self Sponsoredb) Rs. 25,000/- per semester for Industry sponsored.COURSE-3DIPLOMA COURSE IN TOOL, DIE & MOULD MAKING (DTDM)Duration: Four years (8 semesters)Qualification: SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 40% marks for SC/ST category candidates.Age: 15 to 19 years (not born before 31.08.1989)No of seats: 60 seatsCourse Fee: Rs.10,000/- per semester.COURSE-4ADVANCED TOOL MAKER’S COURSE (ATM)Duration: Two years (4 semesters)Qualification: SSC/Matric with ITI in any one of the trades-Tool & Die Maker/ Fitter/ Machinist/ TurnerAge: 25 years (not born before 31.08.1983)No of seats: 30Course Fee: Rs.12,000/- per yearCOURSE-5ADVANCED MACHINIST COURSE (AMC)Duration: Three years (6 semesters)Qualification: SSC (10th Class) or equivalent examination appeared but failed with Maths & Science as subjects.Age: 15 – 24 years (not born before 31.8.1984).No of seats: 15 minimum and 30 maximumMode of selection: Selection on the basis of marks obtained in Maths & Science subjects in the qualifying examination i.e. 10th class failed.Course Fee: Rs.6,000/- per semesterMODE OF SELECTION:A) Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course.B) Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.C) For ATM course, the candidates will be selected based on merit in the qualifying examinatios i.e. X class & ITI with weightage in the ratio of 50:50 respectivelyD) For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed)TENTATIVE DATE OF EXAMINATION : 06.07.08 (Sunday) at Hyderabad.HOW TO APPLY:A) Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.B) Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.C) Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp.Cost of Application form:1 PGTD - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-2 PDTD - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-3 DTDM - General category candidates (Self & Industry sponsored): Rs.300/-; SC/ST category candidates: Rs.100/-4 ATM - General category candidates (Self & Industry sponsored): Rs.100/-; SC/ST category candidates: Fully exempted5 AMC - General category candidates (Self & Industry sponsored): Rs. 100/-; SC/ST category candidates: Fully exemptedPWD category candidates: Fully exemptedThe SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.Commencement of issue of application forms : 23.04.08Last date for submission of filled–in applications (upto 5.00 pm at CITD) : 23.06.08Last date for submission of filled–in applications with late fee of Rs. 100/-: 25.06.08NOTE:1. Candidates appearing for final Degree/Diploma examination can also apply for the respective courses provided they secure a final pass in the qualifying exam at the time of counseling for admission.2. Reservation for SC/ST/PWD category exists in self sponsored category.3. Age relaxation upto 5 years for SC/ST candidates.4. The Institute is not responsible for any postal delay.5. The seats advertised are provisional and the Institute reserves the right to increase or decrease the number of seats.6. The rules made by the Institute regarding selection and closure of the admissions shall be final and the Institute reserves the right to alter, vary, change and / or modify the rules governing the admissions.7. Candidates are advised to refer the prospectus for further details.For further details, please contact Training DepartmentTel Phone No.23771959, 23776156, 23772747,23772748, Fax No. 040-23772658Visit them at: www.citdindia.org E- mail: citdplacements@citdindia.org

AWADHESH PRATAP SINGH UNIVERSITY, REWA (M.P)

ANNOUNCEMENT FOR ADMISSION 2008-2009 (MSc, MCom, BPEd, PGDCA, LLB, LLM, MPEd, MPhil)

ANNOUNCEMENT FOR ADMISSION 2008-2009Applications are invited for admission in the following courses offered by the University Teaching Department and affiliated Colleges for semester and annual courses as per the norms of M.P. Govt. Higher Education Department for the session 2008-2009.COURSES OFFERED:M.Sc. (2 YEARS)Chemistry, Mathematics, Physics, Environmental Biology, Geology, Zoology, Statistics, Computer Science, Botany.Eligibility:B.Sc. (10+2+3) With atlest 45% marks in theory papersApplication form and Entrance Test fee: Rs.500/- (with late fee Rs.750/-)Date/ Time Entrance Test: 06-06-2008 11.00 AMM.Com (2 YEARS)Eligibility:Bachelors Degree (10+2+3) With atlest 45% marks in theory papersApplication form and Entrance Test fee: Rs.500/- (with late fee Rs.750/-)Date/ Time Entrance Test: 06-06-2008 11.00 AMB.P.Ed. (1 YEAR)Eligibility:Bachelors Degree With atleast 50% marksApplication form and Entrance Test fee: Rs.750/- (with late fee Rs.1000/-)Date/ Time Entrance Test: 06-06-2008 11.00 AMPGDCA (1 YEAR)Eligibility:Bachelors Degree With atleast 50% marks Commerce and Mathematics at 10+2 level or its equivalent.Application form and Entrance Test fee: Rs.750/- (with late fee Rs.1000/-)Date/ Time Entrance Test: 06-06-2008 11.00 AMLL.B (3 YEARS)Eligibility:Bachelors Degree With atleast 40% marks in theory papersApplication form and Entrance Test fee: Rs.750/- (with late fee Rs.1000/-)Date/ Time Entrance Test: 07-06-2008 11.00 AMLL.M. (2 YEARS)Eligibility:LL.B With 55% marksApplication form and Entrance Test fee: Rs.750/- (with late fee Rs.1000/-)Date/ Time Entrance Test: 07-06-2008 11.00 AMM.P.Ed. (2 YEARS)Eligibility:B.P.Ed degree with atleast 50% marks.Application form and Entrance Test fee: Rs.750/- (with late fee Rs.1000/-)Date/ Time Entrance Test: 08-06-2008 11.00 AMM.Phil (1 YEAR)Physics, Mathematics, Environmental Biology, Ancient Indian History Culture and Archaeology, Hindi, Policy Research, Business Economics, Psychology, English, Physical Education, Tribal Studies, Bio-Chemistry, Computer Science, Forestry, HRD and Chemistry.Eligibility:Master degree with 55% Marks in the subject, for Policy Research M.A. in any discipline of Social Science with atleast 55% marks.Application form and Entrance Test fee: Rs.500/-Date/ Time Entrance Test: 01-08-2008 12.00 NOONNOTE:1. Application forms can be obtained from office of the Dean, Students Welfare, A.P.S. University, Rewa on all working days personally by giving University cash Receipt or demand draft of Rs.750/- for professional Courses & Rs.500/- for PG Course or through post by a D. D. adding Rs.50/- for Application form and entrance test fee in favour of the ‘Registrar A.P.S. University, Rewa’ (M.P). Outstation candidates desirous to get the application by post should enclose a self addressed unstamped envelope of 28x20cms size.2. Application form can also be obtained form the concerned college where the entrance examination 2008-2009 is being conducted through demand draft only.3. The application form can also be downloaded form University Website and must be submitted along with requir3ed fees in the form of DD as mentioned in is point of notes. The University Website is – www.apsurewa.ernet.in 4. Candidate who have appeared in the qualifying examination are also eligible to apply.5. The Entrance Test for admission in all above courses would be held as per details given in the information bulletin.6. Admission to the courses, complete application form must reach to the office of the Dean, Student Welfare APS University Rewa or Concerned College by 30.05.2008 without late fee and 05-06-2008 with late fee of Rs.250/- where the entrance examination are being conducted. For M.Phil Courses Last date to submit complete application form is 31-07-2008.7. Candidates may apply for more than one course. However separate application forms are to be filled for each courses.8. Admission will be made on the basis of merit obtained in the entrance test to be conducted by A.P.S. University, Rewa9. Reservation as per M.P. Government Rules.REGISTRAR